Try searching by key words, order- or product code or serial number e.g. “CM442” or “Technical information”
Enter at least 2 characters to start the search.
Memosens COS81E: Digital optical oxygen sensor for the life sciences and food industries

Digital optical oxygen sensor
Memosens COS81E

Memosens 2.0 hygienic sensor for the life sciences and food industries

COS81E
Please Wait (spinning wheel)
Loading price
Prices temporarily unavailable
Price on request
from CHF ??.-
Filter Measuring / Application task
Measuring / Application task

Configure to download the CAD drawings of this product

  • Measuring principle

    Optical oxygen measurement

  • Application

    • Oxygen control in fermenters, e.g. in the pharmaceutical or biotechnology sectors
    • Monitoring of explosive atmospheres with an oxygen concentration of ≥ 2% Vol
    • Quality control in the food industry

  • Installation

    Standard process connection Pg 13.5
    Installation in standard pH assemblies possible

  • Characteristic

    Hygienic, optical sensor for stable oxygen measurement over multiple sterilization cycles

  • Measurement range

    0.004 to 30 mg/l
    0.05 to 330 %SAT
    0.1 to 700 hPa

  • Measuring principle

    Principle of luminescence quenching

  • Design

    Optical system, stainless steel

  • Material

    Sensor shaft: Stainless steel 1.4435 (AISI 316L)
    Process seal: FKM (USP<87>, <88> Class VI and FDA)
    Process seal for Ex versions: FKM (not FDA-compliant)
    Seals/O-rings: EPDM, FFKM (USP<87>, <88> Class VI and
    FDA)
    Spot cap: Stainless steel 1.4435 (AISI 316L), titanium or hastelloy
    Spot layer: Silicone (USP<87>, <88> Class VI and FDA)

  • Dimension

    Diameter: 12 mm (0.47 inch)
    Shaft length: 120, 160, 220, 320 and 420 mm
    (4.7 , 6.3 , 8.7 , 12.6 and 16.5 inch)

  • Process temperature

    1 to 140 °C
    (32 to 284 °F)

  • Process pressure

    0.02 to 13 bar abs
    (0 to 190 psi)

  • Temperature sensor

    Pt1000

  • Ex certification

    With ATEX, IECEx, NEPSI, Japan and INMETRO approvals for use in
    hazardous areas Zone 0, Zone 1 and Zone 2 and furthermore Zone 20, Zone 21 and Zone 22 in dust hazardous areas.
    With CSA C/US approval for use in
    hazardous areas Class I Division 1 and furthermore Class II Division 1 in dust hazardous areas.

  • Connection

    Inductive, digital connection head with Memosens 2.0 technology

  • Ingres protection

    IP68
    IP69

  • Additional certifications

    Additional certifications