Cerabar M PMC41

Overload resistant pressure transmitter with a ceramic or metal sensor. Optional: analogue, Smart or PROFIBUS-PA

Mesure de pression de process Transmetteur de pression avec membrane céramique ou métallique résistant aux surpressions et avec surveillance de pression ; Avec électronique analogique, HART ou PROFIBUS PA

Mesure de pression de process

Mesure de pression de process

Transmetteur de pression

M12 plug with new PIN assignment for Cerabar M with analogue or HART electronics

Modification type plate (for instruments in non-hazardous area only)

LIquiphant M/S/Fail Safe,Soliphant M, Cerabar M, Deltapilot M

Approval No.: DMT 99 ATEX E 046 ATEX II 2 G Protection: EEx ia IIC T6...T4 4...20 mA

Approval No.: DMT 99 ATEX E 035 ATEX II 1/3 D PROFIBUS PA

Approval No.: IECEx TUN05.0003 Ex ia IIC T6...T4 HART, PROFIBUS PA

Approval No.: DMT 99 ATEX E 046 ATEX II 1/2 G, II 1/2 D Protection: EEx ia IIC T6...T4 PROFIBUS PA

Approval No.: DMT 99 ATEX E 046 ATEX II 1 G Protection: EEx ia IIC T6...T4 PROFIBUS PA

Approval No.: DMT 99 ATEX E 046 ATEX II 1/2 G, II 2 G Protection: EEx ia IIC T6...T4 HART

Approval No.: DMT 99 ATEX E 035 ATEX II 1/3 D HART

Approval No.: DMT 99 ATEX E 046 ATEX II 1 G Protection: EEx ia IIC T6...T4 HART

Approval No.: DMT 99 ATEX E 046 ATEX II 1/2 G, II 1/2 D Protection: EEx ia IIC T6...T4 4...20 mA HART

Ex ia IIC T6 GYJ071242 (NEPSI)

Approval No.: DMT 99 ATEX E 046 ATEX II 1/2 D Protection: EEx ia IIC T6...T4 HART

Approval No.: EG 99 010-c ATEX II 3 G Protection: Ex nA II T5

Approval No.: DMT 99 ATEX E 046 ATEX II 1/2 G, II 2 G Protection: EEx ia IIC T6...T4 PROFIBUS PA

Approval No.: DMT 99 ATEX E 046 ATEX II 1/2 D Protection: EEx ia IIC T6...T4 PROFIBUS PA

FM Drawing No.: 960393-1035 B Drawing Type: Control Drawing 4...20 mA HART

CSA Drawing No.: 960393-2050 A Drawing Type: Control Drawing PROFIBUS PA

CSA Drawing No.: 960393-2035 B Drawing Type: Control Drawing 4...20 mA HART

FM Drawing No.: 960393-1050 A Drawing Type: Control Drawing PROFIBUS PA

This document provides a brief summary of Open Integration tests for Reference Topology ME01. All content of this document is jointly developed, reviewed and approved by Mitsubishi Electric and Endress+Hauser as acommon deliverable of Open Integration.

Manual for Functional Safety (SIL) HART

Product root: PMC41-, PMC45-, PMC51-, PMP41-, PMP45-, PMP46-, PMP48-, PMP51-, PMP55- Region: Russia Approval agency: Rostekhnadzor Approval number: 01-TY-00477-2014

Product root: PMC41-, PMC45-, PMP41-, PMP45-, PMP46-, PMP48- Region: International Approval agency: PI, PROFIBUS International Firmware Version: PROFILE 3.0 Process communication: PROFIBUS DP